Three-dimensional finite element simulation of fracture propagation in rock specimens with pre-existing fissure(s) under compression and their strength analysis     

Ramin Pakzad  Shanyong Wang  Scott W. Sloan 《国际地质力学数值与分析法杂志》2020,44(10):1472-1494

A FORTRAN program, consistent with the commercially available finite element (FE) code ABAQUS, is developed based on a three-dimensional (3D) linear elastic brittle damage constitutive model with two damage criteria. To consider the heterogeneity of rock, the developed FORTRAN program is used to set the stiffness and strength properties of each element of the FE model following a Weibull distribution function. The reliability of the program is assessed against available experimental results for granite cylindrical specimens with a throughgoing, flat and inclined fissure. The calibration procedure of the material parameters is explained in detail, and it is shown that the compressive to tensile strength ratio can have a substantial influence on the failure response of the specimens. Numerical simulations are conducted for models with different levels of heterogeneity. The results show a smaller load bearing capacity for models with less homogeneity, representing gradual coalescence of fully damaged elements forming throughout the models during loading. The maximum load bearing capacity is studied for various combinations of inclination angles of two centrally aligned, throughgoing and flat fissures of equal length embedded in cylindrical models under uniaxial and multiaxial loading conditions. The key role of the compressive to tensile strength ratio is highlighted by repeating certain simulations with a lower compressive to tensile strength ratio. It is proven that the peak loads of the rock models with sufficiently small compressive to tensile strength ratios containing two throughgoing fissures of equal length are similar, provided that the minimum inclination angles of the models are the same. The results are presented and discussed with respect to the existing experimental findings in the literature, suggesting that the numerical model applied in this study can provide useful insight into the failure behaviour of rock-like materials.  相似文献   

Implementation of a coupled plastic damage distinct lattice spring model for dynamic crack propagation in geomaterials          下载免费PDF全文

Chao Jiang  Gao‐Feng Zhao 《国际地质力学数值与分析法杂志》2018,42(4):674-693

This paper studies dynamic crack propagation by employing the distinct lattice spring model (DLSM) and 3‐dimensional (3D) printing technique. A damage‐plasticity model was developed and implemented in a 2D DLSM. Applicability of the damage‐plasticity DLSM was verified against analytical elastic solutions and experimental results for crack propagation. As a physical analogy, dynamic fracturing tests were conducted on 3D printed specimens using the split Hopkinson pressure bar. The dynamic stress intensity factors were recorded, and crack paths were captured by a high‐speed camera. A parametric study was conducted to find the influences of the parameters on cracking behaviors, including initial and peak fracture toughness, crack speed, and crack patterns. Finally, selection of parameters for the damage‐plasticity model was determined through the comparison of numerical predictions and the experimentally observed cracking features.  相似文献   

沉积物中硬质粘土层的研究进展          下载免费PDF全文

孔凡彪  徐树建  贾广菊 《山东国土资源》2018,34(3)

大量的钻孔资料表明,平原地区及其海域沉积物中普遍有硬质粘土层的存在。硬质粘土层在工程地质、地理学研究等方面具有重要的价值,它不仅是高层建筑的持力层,而且是研究全球环境变化事件、古气候演变的良好载体。该文阐述了硬质粘土层的一般特征、成因以及在粒度、地球化学元素、年代学、沉积环境等方面的研究进展,并展望了硬质粘土层在年代、物质来源和沉积环境等方面的研究方向,认为黄河三角洲硬质粘土层研究较少,需要开展大范围的、系统深入的、多学科的宏观和微观综合分析,挖掘硬质粘土层蕴含的古环境意义和应用价值。  相似文献   

基于TPB拓展模型游艇旅游行为意向影响机制研究     

刘佳  贾楠 《海洋通报》2018,(4):378-388

在改进计划行为理论(TPB)模型基础上,引入人口特征和游艇文化变量,构建游艇旅游行为意向的影响机制模型,以实地调研和问卷调查作为数据来源,运用结构方程模型(SEM)实证检验影响旅游者参与游艇旅游行为意向的主要因素及其作用机制。研究表明:当前我国旅游者参与游艇旅游的意向较高;旅游者的行为态度、主观规范、感知行为控制和游艇文化是影响其选择游艇旅游活动的重要因素;旅游者的行为态度、游艇文化2个变量对游艇旅游行为意向具有显著的正向影响;主观规范和感知行为控制均通过行为态度这一中介变量间接影响游艇旅游行为意向。  相似文献   

深水铺管船托管架疲劳分析及动态监测点选取研究     

闫宏生  王哲  王晓波  陈永訢  孟祥伟 《海洋工程》2018,36(1):107-113

作为S型铺管作业的关键性装备,托管架长期承受着交变载荷的作用,随着海洋开发向超深水发展,结构疲劳破坏问题不容忽视。采用疲劳谱分析的方法并结合线性累积损伤理论,对托管架结构频域下的变形进行了分析,计算了正常海况下和极端海况下托管架疲劳损伤度并对疲劳寿命进行了评估。研究发现托管架在正常海况下作业符合安全要求,在极端海况下局部结构会受到破坏。并从托管架结构安全监测角度,筛选了结构疲劳分析关键点位,为监测点位的选取提供了依据。  相似文献   

Micromechanical approach to effective viscoelastic properties of micro‐fractured geomaterials          下载免费PDF全文

Cássio B. Aguiar  Samir Maghous 《国际地质力学数值与分析法杂志》2018,42(16):2018-2046

The aim of this paper is to formulate a micromechanics‐based approach to non‐aging viscoelastic behavior of materials with randomly distributed micro‐fractures. Unlike cracks, fractures are discontinuities that are able to transfer stresses and can therefore be regarded from a mechanical viewpoint as interfaces endowed with a specific behavior under normal and shear loading. Making use of the elastic‐viscoelastic correspondence principle together with a Mori‐Tanka homogenization scheme, the effective viscoelastic behavior is assessed from properties of the material constituents and damage parameters related to density and size of fractures. It is notably shown that the homogenized behavior thus formulated can be described in most cases by means of a generalized Maxwell rheological model. For practical implementation in structural analyses, an approximate model for the isotropic homogenized fractured medium is formulated within the class of Burger models. Although the approximation is basically developed for short‐term and long‐term behaviors, numerical applications indicate that the approximate Burger model accurately reproduce the homogenized viscoelastic behavior also in the transient conditions.  相似文献   

A CASE STUDY ON CONCENTRATION AND DECENTRALIZATION：BEHAVIOR AND DYNAMIC MECHANISM OF SPATIAL EVOLUTION IN METROPOLITAN AREA，NANJING，CHINA   总被引：1，自引：1，他引：0  

ZHUXi－gang  ZHANGJing－xiang 《中国地理科学(英文版)》2002,12(3):212-217

In rapid socio-economic development,the process of concentration and dispersal of various elements tends to be more dramatic,tremendously influencing the shaping and transformation of the space in metropolitan area.Survey of spatial concentration and decentralization has thus become a basic method in examining metropolitan spatial evolution.In this research,three elements were selected as the essential indicators of the process:demographic density distribu-tion,employment density distribution and business office location.Performance of these elements in Nanjing City was exam-ined historically.As Nanjing City could be regarded as a representative of metropolitan areas in China,its situation large-ly suggestes the general characteristics in similar areas of China.Hence based on the investigation of Nanjing City,four general implications were highlighted.First ,metropolitan areas in China are in a violent process and shift of spatial concentra-tion and decentralization.Second,from now to at least the near future,concentration will continue to be the central fea-ture.Third,the landscape of metropolitan areas basically exhibits a dual structure character.The gap in environmental and ecological qualities among different districts will continue for a long time.Fourth,Central Business District (CBD) is playing an important role in helping to convert the traditionally single-centered city structure into a polycentric one.  相似文献   

Mobile Agent系统结构及其关键技术     

董青  吴跃 《成都信息工程学院学报》2004,19(3):359-362

Mobile Agent技术是一门新兴的技术,具有移动性、智能性和异步计算的特点,已成为计算机网络和分布式系统最具活力的发展方向.现对Mobile Agent的概念、系统结构及其关键技术进行了分析和探讨.  相似文献   

西南矿区山体崩塌成因机制分析及防治对策   总被引：1，自引：0，他引：1  

杜蜀宾 《地球科学与环境学报》2004,26(1):89-92

西南地区的矿区具有相似的地理、地质环境,通过四川芙蓉煤矿白岩崩塌的典型实例,对西南矿区山体崩塌的成灾环境进行调查研究,揭示了西南矿区山体崩塌的成因机制,并简要提出了对该煤矿开发与综合治理建议,指出了加强防治工作的紧迫性,强调开展系统工程防灾的重要性,并为该煤矿解决正常采掘接替及工作面的布置问题作出了科学的指导.  相似文献   

Smeared crack approach: back to the original track     

M. Cervera  M. Chiumenti 《国际地质力学数值与分析法杂志》2006,30(12):1173-1199

This paper briefly reviews the formulations used over the last 40 years for the solution of problems involving tensile cracking, with both the discrete and the smeared crack approaches. The paper focuses on the smeared approach, identifying as its main drawbacks the observed mesh‐size and mesh‐bias spurious dependence when the method is applied ‘straightly’. A simple isotropic local damage constitutive model is considered, and the (exponential) softening modulus is regularized according to the material fracture energy and the element size. The continuum and discrete mechanical problems corresponding to both the weak discontinuity (smeared cracks) and the strong discontinuity (discrete cracks) approaches are analysed and the question of propagation of the strain localization band (crack) is identified as the main difficulty to be overcome in the numerical procedure. A tracking technique is used to ensure stability of the solution, attaining the necessary convergence properties of the corresponding discrete finite element formulation. Numerical examples show that the formulation derived is stable and remarkably robust. As a consequence, the results obtained do not suffer from spurious mesh‐size or mesh‐bias dependence, comparing very favourably with those obtained with other fracture and continuum mechanics approaches. Copyright © 2006 John Wiley & Sons, Ltd.  相似文献